各齒輪均采用硬齒面和磨齒工藝；

All gears adopt hard tooth surface and grinding process;

?

各傳動軸均采用加強型設計；

All transmission shafts adopt reinforced design;

?

采用大直徑軋輥，軋輥直徑￠104，與傳統軋輥相比，更易咬入，相同產能下可獲得更低的轉速和更高的強度；

Large-diameter rolling rolls are used, with a roll diameter of ￠104. Compared with traditional rolling rolls, they are more easily bitten into, and under the same production capacity, lower speed and higher strength can be obtained.

?

各部件的密封和潤滑都采用雙層密封；

All parts are sealed and lubricated with double-layer sealing;

?

電機功率22KW，配齒輪減速箱與主箱體直連，并采用變頻調速；（變頻器品牌為臺達）

The motor power is 22KW, and it is directly connected to the main gearbox with a gear reduction box, and uses frequency conversion speed regulation; (The brand of the frequency converter is Delta)

?

軋線范圍：￠16￠5.5，一個主箱，八個分箱。軋制速度：最快每分鐘出線64米。

Rolling range: ￠16￠5.5, one main box, eight sub-boxes. Rolling speed: the fastest output speed is 64 meters per minute.